Hall Constructors was contracted by Ventana Construction Corp. to complete the excavation and shoring for this new development which includes ground floor commercial with residential condos above. Since anchors could not be drilled at one corner of the site, Hall installed a steel bracing system to retain wall of the excavation. Hall also brought in additional equipment to break through the bedrock and boulders that were present at the bottom of the excavation.
Construction of 40,000 m3 Earthen Flood Dyke, installation of sheetpile flood wall, relocation of existing utilities. Emergency access from Mary Hill Bypass including 12,000 m3 of Granular fill, an open bottom Arch culvert with Retaining Wall. Many difficulties presented themselves on this project, the most prevalent were sourcing and placing specified dyke fill material, driving plastic sheet piles into heavily consolidated ground plus working in and around a heavily secured facility.
This 14,000 m3 excavation & shoring job for Marcon Construction was completed on schedule and on budget in 2015 by utilizing their ocean disposal facility. Special care was taken to retain and underpin a heritage building on the corner of the site.
Excavated 3,900m3 and placed 3,400m3 of engineered fill. Job completed on schedue despite inclement weather.
Hall Constructors completed this excavation and shoring project for Performace Construction in 2015. At the beginning of the project, Hall worked with the environmental engineer to locate and remove over 1,000 m3 of contaminated soil and one underground oil storage tank. Once the site was remediated, Hall progressed the excavation on the small lot by using the back lane and temporary ramps to maintain access.
Hall Constructors completed the excavation & shoring, as well as the offsite civil work on this townhouse project for Marcon Construction. Due to limited working space in this residential neighbourhood, Hall worked with the Owner on phasing the work in order to facilitate the construction of the building once it was at grade.
Under contract with Onni, Hall Constructors completed this 35,000 m3 excavation & shoring project using their barge facility for ocean disposal of all clean, native material. Hall was able to work with Onni to phase the excavation and allow the formwork contractor to begin early work on the back half of the site while Hall finished at the front. This meant that the first suspended slab could be poured before the detail excavation was complete.
Scope of work including replacing existing 200mm watermain with 250mm, site demolition, grading, underground utilities.
Hall Constructors was contracted by EllisDon to complete the offsite civil work at Brentwood Mall for Shape Properties. This extensive project included utility relocation and roadwork upgrades which needed to be completed before redevelopment of the existing mall could begin. While this work was on two very busy roadways, Hall worked closely with the City, Owner and Consultants to execute the work with minimal impacts to the public.